Category Archives: Equipment

RAZOR 4X4

Razor 4x4The Cine Razor is designed with performance and speed in mind. When paired with the GFM large spring mount and GFM iso dampener you can tame the most rugged terrain. In addition the custom made pole mounts allow you to quickly adjust the lens hight from ground level to 10 plus feet in less then a minute. Both the front and rear of the Razor offer over 1500 3/8” bolt holes with half being threaded providing unlimited options for rigging. Various tire packages are available to optimize traction or to provide a safe tread for delicate surfaces such as golf courses. Add one of our wireless stabilized heads and the Razor becomes an awesome off road camera platform.

Grip Trix Cine Power Pack

cine power pack

The Cine Power Pack system is an integration of the most advanced power components available to date. Designed by Rev-TEC specifically for Grip Trix to supply advanced power management for mobile telescopic camera cranes, lighting and other equipment and eliminate the need for trailing power lines or noisy generators. This is a revolution for the film industry.

 

  • Pure sine wave output (THD < 3%)
  • Output frequency: 50/60Hz switch selectable
  • Fully isolated design
  • Power Saving Mode to conserve energy
  • High efficiency 92-94%
  • Start & run highly reactive & capacitive loads
  • Tri-Color indicators show input voltage & status
  • Load controlled cooling fan
  • Advanced microprocessor circuitry
  • Advanced lightweight batteries
  • Power factor corrected charger
  • Renewable Energy Compatible
  • Highly portable, mobile system

Supertechno Truck

super techno truck

The SuperTechno truck base was designed with the Grip and Production in mind. The fact that it is the same vehicle that pulls the SuperTechno trailer to set is not only convenient but also cost effective.  In less then one hour the crane and truck can be ready to shoot.  The side wings can be extended up to 4’ on each side making a 16’ x 12’ platform to work from.  With the tongue extension used you can tow a vehicle and shoot from the front of the grill to the rear license plate. The crane can be loaded on the truck right from the trailer or use the custom made ramps and the cranes built in winch. For location shoots there is no more convenient tool.

Extreme Gator

extreme-gator

Our modified John Deere Pro Gator is capable of carrying any crane up to 30’ – 45 ft. It was designed with the Grip and Camera departments in mind. It is a fully self-contained unit including onboard battery power for the crane, remote head and monitors. The Extreme Gator has multiple storage opportunities so you can go off the beaten path with everything you need to shoot. When the going gets very rough the optional counter weight location lowers the center of gravity to make even the most severe terrain manageable. In addition the Extreme Gator has a hydraulic leveling post and screw jack for the base.

Supertechno Truck

super techno truck

The SuperTechno truck base was designed with the Grip and Production in mind. The fact that it is the same vehicle that pulls the SuperTechno trailer to set is not only convenient but also cost effective.  In less then one hour the crane and truck can be ready to shoot.  The side wings can be extended up to 4’ on each side making a 16’ x 12’ platform to work from.  With the tongue extension used you can tow a vehicle and shoot from the front of the grill to the rear license plate. The crane can be loaded on the truck right from the trailer or use the custom made ramps and the cranes built in winch. For location shoots there is no more convenient tool.

  • Air ride assist and tuned suspension
  • Dual rear wheels for added stability
  • Custom bimini top
  • Front generator platform
  • Stabilizing jacks for static shots
    • 4’ sliding wings
    • Multiple lighting points

Electric Camera Cars

TrackerXL

The Tracker XL is an electric motorized camera dolly that offers maximum versatility in subject tracking and camera positioning. Perfect for steadicam, stabilized heads, jib arms and telescopic cranes such as the Technocrane 15 or the Moviebird 17.

SPECIFICATIONS

Top Speed:                                         35 mph Clearance:                                                        8”
Reverse Top Speed:                          10 mph Front Load Capacity:                              500 lbs
Weight:                                           1,700 lbs Rear Load Capacity:                               500 lbs
Width:                                                       51” Total Load Capacity:                            1,250 lbs
Length:                                                    102” 180 Degree Turing Radius:                          6 ft
Height to Deck:                                         32” Maximum Tow Capacity:                     2,000 lbs
Overall Height:                                          34” Moveable Seats:                                               4
Front Deck:                                     36” x 51” Off-Road Tires:                                                No
Rear Deck:                                      23” x 51” Speed-Rail Receivers:                                     16
Wheel Base:                                             68” Tow Hitch Receiver:                                      Yes
Wheel Diameter:                                      13”  

 

Klaus Cam

Klaus Cam


The Klaus Cam is a fully stabilized long line camera system for the film industry.  It is suspended from a cable that attaches to the cargo hook of a helicopter.  CineMoves has designed a system that can hover without spinning out of control and fly up to 110 mph. This allows us to film subjects close up without the effects of rotor wash from the helicopter and adds a very important degree of safety for the subject being filmed by keeping the helicopter at a safe distance.  This configuration has also allowed us to capture footage that has never been seen before.  We operate this rig with the highest degree of safety and efficiency.   As an added feature, the Klaus Cam can travel as excess baggage.

Superaero Crane

Super Aerocrane

  • Length:  3’ and 6’
  • Width:  5”
  • Height:  5”
  • Main Arm Wt:      109 lbs
  • 6’ Weight:  50 lbs
  • 3’ Weight:  33 lbs
  • Main Arm Pieces:  1
  • 6’ Pieces:  4
  • 3’ Pieces:  1
  •  Width:  5”
  • Height:  11”
  • Length:  1’ 9” (21”)
  • Width:  6 ½”
  • Height:  1’ 1” (13”)
  • Weight:  33 lbs
  • Width   2’ 7 ½” (31½”)
  • Height:   1’ 9 ½” (21½”)
  • Depth:   1’ 4” (16”)
  • Weight:  90 lbs
  • 46 Large @ 28 lbs
  • 2 small @ 13 lbs
  • Length:  5’ 7” (67”)
  • Width:  4’ 6” (54”)
  • Height:   4’-5’ 9 ½” (48”-69 ½”)
  • Weight:  500 lbs
  • Conventional
  • Crab *
  • Round *
  • * When equipped with 2 sided steering
  •  24 ½” or 32” Wide
  • Round Track
  • Approximately
  • 12″ Cube Van or Larger

Inverted Crane

Inverted Crane

The Inverted Crane was designed by CineMoves to allow you to shoot the center of the circle as well as outside and straight down. In addition, we can add lighting to any point of the arm. The Inverted Crane is fully remote operated and extends from 5 to 35 feet. The crane can also be mounted on an over-head track to add another dimension to your camera moves.